Salt la informațiile despre produs
Adam Audio Sub8 PRO studio subwoofer, angled front view
În curând
Precomandă și economisește 5% cu codul EARLY5 — disponibil în curând.

Adam Audio Sub8 PRO

  • 8" High-Excursion Woofer
  • 200W Class D + DSP
  • 26 Hz Extension (-6 dB)
5.440,56 lei
Preț la ofertă  5.440,56 lei Preț obișnuit 
TVA inclus • B2B fără TVA Prețuri fără TVA
i
În curând · 2026-11

Anunță-mă la lansare

Acest produs vine în curând. Lasă-ți adresa de e-mail și te anunțăm imediat ce poate fi comandat — vei fi printre primii. Ai o întrebare sau o solicitare specială? Scrie-o mai jos.

Adam Audio Sub8 PRO 5.440,56 lei

Fără spam — îl folosim doar pentru a răspunde solicitării tale.

Plătește în rate Klarna
  • 3 × 1.813,52 lei Fără dobândă · 18+, se aplică condiții
Vezi ratele
Ofertă pachetEconomisește 10%

Completează-ți setupul

Alege accesoriile — cumpără împreună și economisești 10%.

Adam Audio Sub8 PRO Adam Audio Sub8 PROAcest produs 5.440,56 lei
5.499,37 lei
Livrare gratuită
Livrare gratuită peste €149 sau €4 la un punct de ridicare. Îl expediem imediat ce sosește — estimat 2026-11. Află mai multe
Retur în 30 de zile
Nu ți se potrivește? Returnează în 30 de zile și primești banii înapoi integral. Află mai multe
Garanție 3 ani
Fiecare produs include garanția standard a producătorului. Prelungește garanția
Garanția prețului
Ai găsit mai ieftin în altă parte? Egalăm prețul. Află mai multe

Adam Audio Sub8 PRO – Networked 8-Inch Studio Subwoofer

The Sub8 PRO is the compact entry to ADAM Audio's networked Sub PRO line: a front-firing 8″ subwoofer with a 200 W Class D amplifier, onboard 96 kHz DSP and an Ethernet port that opens up ADAM Control and Sonarworks SoundID Reference calibration. It reaches down to 26 Hz (-6 dB), takes analog or AES3 digital signal, and switches between Stereo, LFE and Wide modes, so the same box works under a desktop stereo pair or inside an immersive rig. At Soundium we see it as the natural low-end partner for A Series and other compact nearfield systems where space is tight but the bass still has to be trusted.

Key Features

  • High-excursion 8″ woofer: Fiber-reinforced paper cone with an elasticated rubber surround and 35 mm voice coil for long, controlled cone travel
  • 200 W RMS Class D (PWM) amplifier: 325 W peak, driven by 96 kHz DSP that handles crossovers, filtering and equalisation
  • ADAM Control over Ethernet: Free software for gain, phase, delay (0 to 10 ms) and 4-band parametric EQ, plus firmware updates
  • Sonarworks SoundID Reference integration: Calibration filters from SoundID Reference can be deployed straight to the subwoofer's DSP, as on ADAM's A Series monitors
  • Analog and digital inputs: 2× XLR/TRS combo inputs and XLR AES3 digital input up to 24-bit/96 kHz, with 2× XLR and AES3 outputs to your monitors
  • Stereo, LFE and Wide modes: Classic 2.1 bass management, an LFE mode (<120 Hz) tailored to Dolby Atmos systems, or full available range
  • FEA-optimised front bass port: Port curvature modelled with Finite Element Analysis for consistent air speed and less turbulence at high levels
  • Footswitch bypass input: Toggle bass management via a TRS footswitch (not included)

Customer Benefits

Small rooms are where bass goes wrong first. The Sub8 PRO gives you the tools to fix that properly: time-align the sub to your mains, notch out room modes with four bands of EQ, or load a measured SoundID Reference profile, all without leaving your chair. The backplate still offers level, phase, crossover and input selection for quick setups, so you can start simple and calibrate deeper when you are ready.

Quick Specs

  • Driver: 8″ fiber-reinforced paper cone, 35 mm voice coil
  • Amplifier: Class D (PWM), 200 W RMS / 325 W peak
  • Frequency response: 30 Hz – 228 Hz (-3 dB), 26 Hz – 300 Hz (-6 dB)
  • Max SPL: 105 dB RMS / 110 dB peak (sine bursts 50–100 Hz, 1 m); 112 dB peak (IEC noise, full range)
  • Analog inputs: 2× XLR/TRS combo (25 kOhm, max +19 dBu)
  • Digital I/O: XLR AES3 in and out, up to 24-bit/96 kHz
  • Analog outputs: 2× XLR
  • Network: RJ45 Ethernet (AES70 / TCP), ADAM Control for macOS and Windows
  • Bass management: 70, 85, 100, 115 Hz (variable via ADAM Control)
  • Phase: 0° to -315° in 45° steps
  • Level: -18 dB to +6 dB
  • Operating modes: Stereo, LFE (<120 Hz), Wide, Remote Control
  • Cabinet: Front-firing, front-ported; vinyl-wrapped MDF with painted MDF front panel, metal grille
  • Power consumption: 400 W max, 2.5 W standby
  • Dimensions (H × W × D): 385 × 300 × 365 mm
  • Weight: 15.3 kg

In the Box

  • Adam Audio Sub8 PRO subwoofer
  • Power cable
  • Quick Start Guide

Use Cases / Ideal For

Home and project studios running compact nearfields such as the A4V or A7V, producers who need to hear sub-bass in electronic and hip-hop mixes, and small immersive or post-production rooms that need a networked, calibratable LFE channel.

Compatibility

Works with any active monitors via balanced XLR or TRS, or digitally via AES3. ADAM Control runs on macOS and Windows and also manages ADAM A Series monitors on the same network, so a full A Series plus Sub PRO system can be calibrated from one application.

Pros & Cons

✅ Pros:

  • Network calibration with ADAM Control and SoundID Reference built into the DSP
  • AES3 digital input alongside analog XLR/TRS
  • LFE and Wide modes make it ready for immersive and full-range setups
  • Compact cabinet for its 26 Hz extension

⚠️ Cons:

  • No RCA or other unbalanced consumer inputs
  • Full calibration needs a computer on the network (and a measurement mic for SoundID Reference)

The Adam Audio Sub8 PRO brings the calibration tools of a large studio to a subwoofer that fits under a desk. Pair it with your monitors and order it from Soundium for a low end you can finally rely on.

Detalii și specificații

Tot ce este tehnic despre acest produs: specificații, conținutul cutiei și descărcări.

General 6
MarcăAdam Audio
Tip de produsSubwoofer
TipActiv
TehnologieDinamic
Utilizare prevăzutăMonitorizare de studio
Sursă de alimentareAlimentare la rețea
Conectivitate 3
ConectivitateCu fir
Conexiune de intrareCombo XLR/TRS, AES/EBU, Ethernet
Conexiune de ieșireXLR, AES/EBU
Dimensiuni și greutate 2
Dimensiuni30.0 × 36.5 × 38.5 cm
Greutate15.3 kg
Garanție 1
Garanție3 ani

Surse: Date de la producător

Comparație
Recenzii
S-ar putea să vă placă și